Handling And Unpacking; Transport - Solahart Solahart475DH1 Installation Manual

 Do not disconnect the electrical connection when
there is a load.
 It is strictly forbidden to try to disassemble the PV
module, and it is strictly prohibited to remove the
nameplate of the PV module or other parts on the PV
module; it is strictly forbidden to paint or apply any
adhesive on the surface of the PV module.
 It is strictly forbidden to drill holes in the frame of
the PV module.
 It is strictly forbidden to scratch the anodized layer
on the surface of the aluminum alloy frame, except
when it is connected to the ground. Scratches may
cause corrosion of the frame, affecting the frame's
load-bearing capacity and long-term reliability.
 If the PV module glass or other packaging materials
are damaged, please wear personal protective
equipment to separate the PV module from the site or
the circuit. It is strictly forbidden to touch wet PV
modules, unless you are wearing electric shock
protection equipment that meets the requirements.
 When professionals replace or repair PV modules,
do not damage the surrounding PV modules or their
support structures.
 When cleaning PV modules, you must follow the
cleaning requirements of PV modules.
 The connectors must be kept dry and clean to ensure
that they are in good working condition. Do not
insert other metal objects into the connector or make
electrical connections in any other way.
4

Handling and unpacking

6
 If the PV module is not in use, please do not open
the product packaging. The goods should be stored
in a dark, dry and ventilated place. If the PV modules
are stored in an uncontrollable environment, the
storage time must be less than 3 months when the
outer packaging of the PV modules is kept intact.
 It is recommended to unpack an appropriate number
of PV modules per day according to the project
progress, and the unpacked PV modules should be
installed within a day. If unpacking too many PV
modules and being stacked on the ground, in severe
weather such as heavy rain and typhoons, the PV
modules may be immersed in water for a long time
affecting the reliability of the product or be scraped
away.

4.1 Transport

 During the transportation of the PV modules to the
project site, they must be packed in the packaging
box provided by Solahart, and they should be stored
in the original packaging box before installation.
Please protect the packaging from damage.
 It is necessary to ensure the safety when unloading
PV modules, especially when hoisting roof projects.
It is forbidden to use lifting straps directly on the
pallet for hoisting. The PV modules should be placed
in a protective device and then hoisted to the roof to
prevent the packing box from deforming and
bumping against the wall during the hoisting process.
！Special instructions
Due to the limitation of the height of the container,