Table of Contents
Advertisement
8.2.1 Selection of TV Mode
Select the TV Input by one of three methods:
1.
Press the Input key. A menu of input signal sources
will appear on-screen as shown in the picture
opposite.
source desired and press the
selection.
2.
Press the VIDEO key repeatedly to select a signal
source from the video module. The signal sources are
displayed in the following sequence:
AV1 S-Video YCbCr/PbPr TV/CATV
3.
The display will search for the TV/CATV signal automatically if there is no
other input.
8.2.2 Selection of Video Input Mode
•
Press the VIDEO key repeatedly to select a signal source from the
video module. The signal sources are displayed in the following
sequence:
AV1 S-Video YCbCr/PbPr TV/CATV
8.2.3 Selection of PC Input Mode
•
Press the PC key repeatedly to select a signal source from the PC
module.
The signal sources are displayed in the following
sequence:
RGB1 RGB2
RGB1 = Analog D-Sub input on PC Module.
RGB2 = Digital DVI-D input on PC Module.
Use the
/
keys to select the signal
28
key to confirm the
Advertisement
Table of Contents
