Table of Contents
Advertisement
6.4.1 Key Functions
(1)
SETUP - This button starts all programming sequences.
(2)
Remote LED – Blinks when the remote is being programmed or is sending a signal
to your Plasma Display.
(3)
POWER - Press this key to turn the Plasma Display On
from Standby mode.
Standby mode.
(4)
TV – This button selects a programmed TV.
programmed for the VIZIO P46 Plasma TV.
(5)
DVD – This button selects a programmed DVD player.
(6)
VCR – This button selects a programmed VCR.
(7)
TV2 – This button selects a second programmed TV.
15
(8)
CBL/SAT – This button selects a programmed cable TV set-top box or selects a
programmed satellite TV set-top box.
(9)
AMP – This button selects a programmed amplifier.
(10)
CD – This button selects a programmed CD player.
(11)
AUX – This button selects a programmed component.
(12)
Number Button Pad – These buttons select a channel or
password.
(13)
MUTE – This button turns the sound on and off.
(14)
100/Enter – This button enters a channel number greater
than 100 in TV mode. Works as an ENTER button in other
video modes.
(15)
VOL – These buttons turn volume up or down.
(16)
LAST – This button recalls the previously viewed channel.
SLEEP – This button turns on the sleep timer for other V, Inc
(17)
devices. NOTE: This button is NOT active for the VIZIO
P46 model.
(18)
INPUT – This button changes the input source.
(19)
CH – These buttons change the channels up or down.
Press it again to return to the
19
Pre-
Advertisement
Table of Contents
