Table of Contents
Advertisement
8.
Basic Operation
8.1
Power On / Off
•
Press the POWER key to turn on the display. The power indicator
will change from red to green.
•
Press the POWER key again to return the display to Standby mode.
The power indicator will change from green to red.
Note: The power indicator will flash for a few seconds before
changing color.
8.2
Input Mode Selection
•
When the Input key is pressed, a menu of input signal sources will
appear on-screen.
desired and press the
sources are displayed in the following sequence:
RGB1 RGB2 AV1 S-Video YCbCr/PbPr TV/CATV
RGB1 = Analog D-Sub input on the PC Module.
RGB2 = Digital DVI-D input on the PC Module.
Note: You may also press the Input key repeatedly until the
signal source you want is highlighted. When selecting an input
in this manner, you do not have to press the
selected input will appear after a brief pause.
Use the
/
keys to select the signal source
key to confirm the selection. The signal
27
key.
The
Advertisement
Table of Contents
