Table of Contents
Advertisement
VIZIO P42 HDTV User Manual
Cable/Air/Auto – The default selection is Auto. This
means that the TV will scan for antenna and cable
channels and takes the most time. If you have an
antenna connected choose Air, or if you have cable
connected choose Cable, and the TV will take less
time in searching for channels.
Scan – Press the
button to highlight Scan. Press
the OK button to activate.
Note: This will take a few
minutes to complete.
Once Auto Scan has finished, press the EXIT button to
return to the previous menu.
Note: If you press OK,
the Auto Scan process will start again.
Manual Scan – If you feel that not all of the available
digital TV channels were found with Auto Scan, then
selecting this option makes the TV try again to find any
missing channels. Press the
to highlight Manual
Scan and then press the OK button.
Note: A channel will be missed if it is not transmitting
at the time of the scan and so you should try again at a
time when you know the station is transmitting
programs.
A channel will also be missed if it is too weak to be
received. Re-orientation of the antenna or changing to
a higher gain antenna may help, but note that any
changes to the antenna may affect other channels.
Version 1/18/2006
34
www.VIZIOCE.com
Advertisement
Table of Contents
