Table of Contents
Advertisement
2.7 Connecting a PC Computer
1.
Turn off the power to the Plasma TV and PC Computer.
2.
Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your pc computer and the
other end to the RGB PC input (purple area) at the rear of the Plasma TV.
3.
Connect the Audio Out on your pc computer to the RGB PC Audio input (purple area) at the
rear of the Plasma TV.
4.
Turn on the power to the Plasma TV and PC Computer.
5.
Select RGB using the INPUT button on the remote or side of the Plasma TV, or directly by
pressing the RGB button on the Remote Control.
Note:
a)
For the best picture quality when connecting a pc computer through RGB PC, set your pc
computer timing mode to VESA 1024x768 at 60Hz. Please refer to the pc or graphic card's
user guide for additional information on how to set the timing mode.
b)
Refer to your pc computer user manual for more information about the video output
requirements of the product.
c)
A RGB (VGA) cable and stereo mini jack cable are not included and can be purchased at an
electronics store.
Version 1/18/2006
29
www.VIZIOCE.com
VIZIO P42 HDTV User Manual
Advertisement
Table of Contents
