SERVICE
CLEANING CYLINDER FINS
(Check Periodically)
1. Remove cover.
2. Remove dust and dirt from between fins.
3. Reinstall cover.
4. Clean air intake grids on crankcase.
REPLACING NYLON LINE
(GT-2101, Echomatic Head)
1. Turn cutting head clockwise, using locking tool, until
head comes free of shaft.
2. Depress button on head and remove cover.
• Remove hub and spring from head.
3. Secure one end of the replacement nylon line to the
loop on the hub.
• Hold the line tight while winding it in a clockwise
direction.
15