Vizio L6 User Manual page 32

Instead of stepping through TV channels using the Channel▲ and Channel▼ buttons, a channel can
be accessed directly by pressing the Number buttons on the Remote Control to change the channel;
ill be displayed at the top right of the screen.
the channel number w
1. When in the TV mode, the channel can be changed directly by pressing the Number buttons on
the Remote Control.
2. Before the channel is changed the current channel number is shown and the CA prefix color is
yellow as shown in Figure 23.
3. After changing to the new channel, the display changes to the new channel number and the CA
prefix color changes to green, as shown in Figure 24.
4. If the Display function is disabled the channel number will be displayed for approximately three
(3) seconds. If the Display function is enabled then the channel number display will remain.
5. If a deleted channel number is accessed directly then the CA prefix color and channel number
color will be red. See Figure 25.
Figure24 Channel number OSD (Channel has changed)
Figure25 Channel number OSD (Channel is deleted)
31
VINC.COM