Table of Contents
Advertisement
Troubles
The STOPWATCH hands do not
return to the 0 position when the
stopwatch is reset.
The inner surface of the glass is
clouded.
The date changes during the day.
36
Possible causes
Affected by external sources, or because the
internal IC had been reset, the stopwatch hand
positions have moved out of correct alignments.
Moisture has entered the watch because the
gasket has deteriorated.
The time is set 12 hours ahead of or behind
the correct time.
Solutions
Adjust the STOPWATCH hands to the 0 position by following the instructions in
"TIME SETTING AND HAND POSITION ADJUSTMENT." (P. 11)
Contact the retailer from whom the watch was purchased.
Reset the time correctly, referring to "TIME SETTING AND HAND POSITION
ADJUSTMENT." (P. 11)
•
In the event of any other problem, please contact the retailer from whom the watch was purchased.
37
Advertisement
Table of Contents
