Table of Contents
Advertisement
Second click
24-hour hand
◆ At the moment when the main dial time indicates 12 o'clock midnight, the date
changes. When setting the time, make sure that AM/PM is set correctly.
◆ When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired
time, and then turn it back to the exact time.
◆ The 24-hour hand moves correspondingly with the hour hand.
16
• This operation can be performed both in
the POWER RESERVE DISPLAY mode
and STOPWATCH mode.
t
Turn to set the main dial time.
CROWN
t
After time setting for the main dial
CROWN
is complete, push into the normal
position.
SETTING THE DATE
l Before setting the date, be sure to set the main time.
l Cal. V194
Big date calendar
l Cal. V192
Date
CROWN
Pull out to the first click.
t
Turn clockwise until the desired
date appears.
t
P u s h b a c k i n t o t h e n o r m a l
position.
1. It is necessary to adjust the date at the end of
February and 30-day months.
2. Turn the crown gently and slowly to set the date,
especially when the tenth digit changes (only for
Cal. V194).
3. Do not set the date between 9:00 p.m. and 1:00 a.m.
Otherwise, the date may not change properly.
17
Advertisement
Table of Contents
