Pulse Rcu, Functionality Overview - Barco F 400 Series User Manual

How to set
1. Remove the cover. For more info on how to remove, see
2. Place the switch in the desired position.
Image 2–5
Remarks when using the RC5 protocol
Due to new or updated functionality not all buttons of the Pulse RCU are one-to-one compatible with the
legacy Barco RCU and projectors. Take the following limitations into account:
• Buttons Shutter open and Shutter close emit the same code when in RC5 mode. This because the
legacy RCU's only had 1 button for Shutter functionality.
• Buttons Power on and Power off emit the same code when in RC5 mode. This because the legacy RCU's
only had 1 button for Power functionality.
• The RGB filter button is not supported.
• The Input selection button is not supported.
• The Default value button is not supported.
• The Macro button is not supported.

2.4 Pulse RCU, Functionality overview

Remote Control Unit buttons
1
2 24
3 23
4 22
5 21
6 20
7 19
8 18
9
10
11
12 17
13
14 16
15
Image 2–6
25 26
Remote Control Unit
"Pulse RCU, battery installation", page
R5915525 /00
25.
Fx400 Series 27