Lorex P10 LNZ44P12 Instruction Manual page 35

7 Controlling the PTZ camera with LNK Series NVRs
8. Iris: Click –/+ to set the iris. Adjusting the camera's iris settings al-
low you to control the amount of light that enters the camera's
lens. The higher the iris value, the greater the amount of light that
enters the camera's lens.
CAUTION
Adjust the camera's iris settings to match the environment
where the camera is installed. Too much light exposure might
result in a very bright camera image.
9. Preset: Click to access preset settings. For details on setting pre-
sets, see 7.1.1 Setting PTZ Presets, page 32
#; r. 4.0/47037/47040; en-US 31