Table of Contents
Advertisement
Listening to video recorder audio sound
1. Press the VIDEO button of the INPUT SELECTOR.
2. Press the VIDEO button to select with either of the
outputs
from
video
recorders
connected
to the
VIDEO A and VIDEO B jacks.
. Operate the video recorder.
. Adjust the VOLUME controls for your preference.
5. When a video monitor is connected to the MONITOR
OUT jack on the rear panel, the picture from the
recorder can also be monitored.
Note:
When connecting a monaural video recorder, connect it to the VIDEO
A jack and set the MONO/STEREO switch to '''MONO''.
Bo
Dubbing between two video recorders
When
dubbing from VCR, the SYNTHETIC
STEREO
switch and EQUALIZER switch can be operated.
Synthetic stereo effect
Play back the video recorder and set the SYNTHETIC
STEREO switch to ''ON''. The sound with the synthetic
stereo effect can be recorded onto an audio tape deck.
Graphic equalizer operation
For equalizer level setting, refer to 'EQUALIZER LEVEL
controls'' on page 7. For presetting equalizer curves,
refer to ''EQUALIZER
PRESET
MEMORY
button'
on
page 8. Three desired equalizer curves can be preset in
addition
to the
LOUDNESS
curve
(a curve
with
loudness effect in which high and low frequencies are
enhanced, preset under the
A LOUDNESS button) and
the
PRESENCE
curve
(mid-range
frequencies
are
enhanced for vivid reproduction of vocals, preset in the
B PRESENCE button).
. Set the EQUALIZER switch to ''ON''.
PWN
V125R only)
you want to record.
. Set the EQ REC switch to ''ON"'.
. Play the source to be recorded.
Oooh
KR-V125R/KR-V75R (U) 14
Advertisement
Table of Contents
