Table of Contents
Advertisement
6.4 How to use the flash mode
* Camera have three flash mode No Flash / Auto Flash / Force Flash
* Camera was set at the No Flash mode in order to save power
* If you want to take a picture without flash, you can stay with No Flash mode
and the flashlight will stay off.
* If you not sure if the picture condition need flash or not, you can press the
'Flash'
mode button to set the flash at Auto Flash model.
* Once you select this mode, the flash green LED on the button will blink until it
was full charged. The flash will automatically charge again when the flash was
used.
* Camera will stay at Auto Flash mode once selected, and it will return to No
flash
mode by changing the flash mode again or it will reset to No flash mode
while the
camera was switch off and restart again.
*
If you want to use Force flash, press the flash button to Force flash mode.
The
flash mode will be reset at No flash mode once the picture be taken once.
* Flash Mode icon will show on the top right hand side of the LCD display to
reflect
the flash status.
Auto
Force
Off
Note : Don't use any flash in Marco mode.
Flash
'
'
Depend on the environment
The flash is turn on no matter the light is strong or weak. The
environment will adjust the sharpness of the flashlight.
The flash is turn off no matter the light is strong or weak. The
mark fit to the environment that the flash is forbidden to use.
'
'
'
'
'
'
18
Advertisement
Table of Contents
