Auto Power Off - Vivitar Vivicam 3745 User Manual

AUTO POWER OFF

In case no buttons or switches are pressed for a certain period of time while powered on, the camera
stays idle or turns off automatically to conserve power after the inactivity period as mentioned below.
Inactivity period Inactivity period Camera status
(batteries) (AC power adapter)
E
90 seconds 90 seconds Stay idle
3 minutes 30 minutes shut off
To activate the camera again while stayed idle, press any button or switch the mode dial. If the camera
is shut off automatically, you need to turn the camera on again by pressing the button. The table
above shows the default settings of auto power off. You can change the setting by using the /
button and then press the ENTER button.
[3 min], [5 min], [10 min], [30 min]
62