Table of Contents
Advertisement
13. Click Continue Anyway button (for Win XP) or Yes button
(Win 2000) when you see this warning message:
14. The drivers installation is complete.
Downloading Images / Movies from Removable Disk
1.
Make sure camera is connected to your computer and is in Mass
Storage mode. Press MENU, UP, ENTER buttons on the camera
if necessary.
2.
Open Windows Explorer on My Computer
3.
Search through Removable Disk > Dcim > 100cnxnt and double-
click 100cnxnt folder
4.
Image files that you have taken will be shown directly in the right
pane, while the movie files are stored in the Movies folder
5.
You can download your image / movie files by copying and pasting
them to your computer hard disk.
Playing back Downloaded Movies
1.
Locate the movie file you want to playback
2.
Double-click the file and the .MOV file will b opened with its
associated application
NOTE: Programs for playing .MOV files are NOT included in this
camera package. You have to install those programs on
your computer before you can playback your downloaded
movies.
Locating the Video Driver
1.
Make sure camera is connected to your computer and is in Silent
Video mode. Press MENU, DOWN, ENTER buttons on camera
if necessary.
2.
Search through Start > Control Panel > System > Hardware >
Device Manager > Imaging Devices and you should find the
installed video driver for your camera - Raptor 1.3 CMOS DSC
Downloading Images using PhotoStudio
NOTE: The graphics shown are based on the user interface in Windows
98SE
1.
Take some images with your digital camera
2.
Connect the camera to the computer with the USB cable
3.
Search through Start > Programs ("All Programs" for Windows
XP) > Vivicam 3555 Digital Camera Suite and click PhotoStudio
2000 icon
4.
Select File and click Select Source icon from the pull-down menu
and select Vivicam 3555 USB Still Camera. Make sure your camera
is in Mass Storage mode and connected to your computer.
21
Advertisement
Table of Contents
