Table of Contents
Advertisement
2.
Search through Start > Settings > Control Panel > System >
Device Manager > Imaging Devices and you should find the
installed video driver for your camera - Raptor 1.3 CMOS DSC
Installing Arcsoft Programs and Camera drivers - Windows
2000/XP
NOTE: The graphics shown are based on the Windows XP user interface
1.
Put the program CD into the CD-ROM drive, it will Autorun
2.
Select your desired language
3.
Change Destination Folder if necessary
4.
Select components to install
5.
Change program folder name if necessary
6.
Check the checkbox to start camera drivers installation
Installing camera drivers ........
7.
When installation is complete, restart your computer
8.
After your computer is restarted, power up your camera
9.
Turn the Mode dial to PC mode. "PC" will appear on Status LCD
panel.
10. Connect camera and computer with the USB cable
11. The following screen will appear to indicate that Removable
Disk has been installed in your computer. Click Cancel button
to move on to video driver installation.
12. Press the MENU, DOWN, and ENTER buttons on the camera to
select Silent Video mode and wait for the following screen to
appear. Select the first radio button and click Next button to start
video driver installation.
20
Advertisement
Table of Contents
