Camera Function Selection - Vivitar Vivicam 3355 User Manual

n
: Delete a single image or movie clip
8. Flash Mode and Status Indicator:
n
Blinking: Indicates that the flash capacitor is charging
n
On: The flash is charged and ready
9. SD Card Indicator:
n
On when an SD card has been inserted
n
Off: An SD card is not present. Internal memory will be used.
Note: Like most digital cameras, the Vivicam 3355 has a memory card
"preference". Whenever a memory card is present in the camera, the
memory card will be used in preference to internal memory.
10. Battery Indicator:
n
Two segments: the batteries are good. One segment: the batteries are OK.
n
Blinking: the batteries are low. Replace them immediately.
11. Movie Mode:
n
: The camera is set to movie mode, ready to capture short movie clips.
Note: In the movie mode the resolution will always be 320 x 240 and the quality
(compression) is not selectable, as it is defined by the video codec.
12. Self-Timer:
n
: Self-timer mode

3.3 Camera Function Selection

n
Press the Mode Button to select the desired function. The function icons will display on the
status/information LCD panel. Press the Select (SET) button to confirm a selection.
n
As you press the Mode Button the Function icons will be presented as follows:
? ? ? ?
- -
7
?