Crown CTS 1200 Catalog page 77

ACCESSORIES & REFERENCE ACCESSORIES
Accessories
P.I.P.-CLP
The P.I.P.-C.L.P. is designed to detect and prevent overload. The same error
detecting circuit that is used to signal the IOC indicator is used to activate this
error-driven compressor. It is not a typical signal-driven compressor but a
circuit to prevent an overload. It can yield up to 13 dB of additional signal safety
margin without noticeable program change.
Commercial Audio Accessories
RM1 Rack-Mounting Kit
The Crown RM1 is a single-unit rack-mounting kit.
It is designed to be used with Commercial Audio
models 135MA and 160MA mixer-amplifiers.
IST Isolation Transformer
The Crown IST is a 600-ohm to 600-ohm isolation
transformer used for telephone connectivity. It is
designed to be used with Commercial Audio models
135MA and 160MA mixer-amplifiers.
cya
(cover your amp)
3PLUS3 3+3 Extended Warranty
Crown's No-Fault, 3+3 Extended Warranty pack-
age extends the terms of your original full war-
ranty for an additional three years, thus covering
years four through six. Available for Crown
amplifiers only.
RM2 Rack-Mounting Kit
The Crown RM2 is a dual-unit rack-mounting kit.
It is designed to be used with Commercial Audio
models 135MA and 160MA mixer-amplifiers.
S-COVER Security Cover Bulk Pack
The Crown S-COVER is a 10-pack of security cov-
ers. It is designed to be used with Commercial Audio
models 135MA and 160MA mixer-amplifiers.
A C C E S S O R I E S
www.crownaudio.com
• 77