Table of Contents
Advertisement
en Troubleshooting
Fault
The laundry is too
damp.
40
Cause and troubleshooting
Unsuitable programme for the type of fabric.
Set a timed programme for the subsequent drying.
▶
→ "Programmes", Page 23
There has been a power cut.
Check whether the lighting in your room or other
▶
appliances are working.
The load is too large.
Observe the maximum load capacity of the
▶
→ "Programmes", Page 23.
After the end of the programme, warm laundry feels
damper than it actually is.
Remove the laundry from the drum as soon as the
1.
drying programme has finished.
Spread the items of laundry for cooling.
2.
Unsuitable dryness level set.
→ "Changing the dryness level", Page 22.
▶
Drying target not adjusted.
→ "Adjusting the dryness level", Page 22.
▶
Load too small.
Set a timed programme for the subsequent drying.
▶
→ "Programmes", Page 23
Moisture sensor dirty.
→ "Cleaning the moisture sensor", Page 36.
▶
The drying process is interrupted and the condensa-
tion tank has been filled.
→ "Emptying the condensation container", Page 30.
1.
→ "Inserting the condensation container", Page 30.
2.
→ "Starting the programme", Page 27.
3.
Advertisement
Table of Contents
