Clean the heat exchanger cover
2.
under running water and dry it.
Make sure that you remove all dirt
from the seal.
Pull out the heat exchanger hori-
3.
zontally.
Clean the heat exchanger from all
4.
sides under running water and dry
it.
Cleaning and servicing en
Clean the opening with a soft,
5.
damp cloth.
Slide the heat exchanger in hori-
6.
zontally as far as it will go.
Ensure that the heat exchanger is
inserted with its handle pointing
downwards.
Close the base unit → Page 35.
7.
Closing the base unit
Requirement: The base unit is open.
→ "Opening the base unit", Page 34
35