Table of Contents
Advertisement
en Troubleshooting
Fault
Creasing.
and programme
terminated.
Condensation in the
condensation tank
even though the water
drain hose is connec-
ted.
The programme does
not start.
38
Cause and troubleshooting
The laundry lies in the drum for too long after drying.
Remove the laundry from the drum as soon as the
1.
drying programme has finished.
Spread the items of laundry for cooling.
2.
Unsuitable programme for the type of fabric.
Set the suitable programme for the type of fabric.
▶
→ "Programmes", Page 23
Easy-Care fabrics are dried for too long.
→ "Changing the dryness level", Page 22.
▶
→ "Adjusting the dryness level", Page 22.
▶
Crease-reduction function not activated.
Activate the crease-reduction function.
▶
→ "Buttons", Page 20
Condensation tank filled.
→ "Emptying the condensation container", Page 30.
1.
→ "Inserting the condensation container", Page 30.
2.
→ "Starting the programme", Page 27.
3.
Water drain hose is caught or jammed.
Ensure that the water drain hose is not kinked or
1.
trapped.
Route the water drain hose without kinks.
2.
Water drain hose is not connected correctly.
Ensure that the water drain hose is connected cor-
▶
rectly.
Water drain hose is blocked.
Rinse the water drain hose with tap water.
▶
Foreign object is located in the base unit
→ "Opening the base unit", Page 34.
1.
Remove the foreign objects that are present.
2.
→ "Closing the base unit", Page 35.
3.
The remaining volume of condensation may remain in
the condensation container.
Not a fault – no action required.
▶
Water drain hose is not connected correctly.
Ensure that the water drain hose is connected cor-
▶
rectly.
Childproof lock is activated.
Deactivate childproof lock.
▶
→ "Deactivating the childproof lock", Page 31
Advertisement
Table of Contents
