Yamaha GRIZZLY 550 2015 Owner's Manual page 38

EBU18081
Engine stop switch "
Set this switch to "
The engine stop switch controls the ignition and
stops the engine when it is running. Use this
switch to stop the engine in an emergency situa-
tion. The engine will not start or run when this
switch is set to "
4
EBU18102
Start switch " "
Push this switch to crank the engine with the start-
er. See the starting instructions on page 6-1 prior
to starting the engine.
EBU18155
Light switch "
Set this switch to "
and the taillight. Set the switch to "
the high beams and the taillight. Set the switch to
"OFF" to turn off all the lights.
ECB00044
NOTICE
Do not use the headlights with the engine
turned off for an extended period of time, oth-
erwise the battery may discharge to the point
that the starter motor will not operate properly.
If this should happen, remove the battery and
/ "
" before starting the engine.
".
/ /OFF"
" to turn on the low beams
" to turn on
recharge it. (See page 8-55.)
EBU18171
Horn switch "
Press the switch to sound the horn.
EBU18191
Override switch "OVERRIDE"
1. Override switch "OVERRIDE"
Top speed is normally limited when operating in
differential gear lock. If conditions require more
engine power when riding forward, push and hold
this switch to override the differential gear lock
speed limiting function. (See page 4-10.) Releas-
ing the switch restores the speed limiting function.
4-8
"