EBU25702
Installing a wheel
1. Place the ATV on a level surface.
2. Install the wheel and the nuts.
TIP
The arrow mark
ward the rotating direction of the wheel.
Tapered nuts are used for both the front and
rear wheels. Install the nuts with their tapered
side towards the wheel.
1. Arrow mark
on the tire must point to-
1
1. Tapered nut
3. Lower the ATV to the ground.
4. Tighten the wheel nuts to the specified
torques.
Tightening torques:
Front wheel nut:
55 Nm (5.5 m·kgf, 40 ft·lbf)
Rear wheel nut:
55 Nm (5.5 m·kgf, 40 ft·lbf)
8-65
8