1. Front carrier
2. Carrier bolt (upper)
1. Carrier bolt (lower)
3. Remove the battery holding plate by remov-
ing the nuts.
4. Disconnect the negative battery lead first,
then the positive battery lead by removing
their bolt. NOTICE: When removing the bat-
tery, the main switch must be off, and the
negative lead must be disconnected be-
fore the positive lead.
1
2
1. Battery holding plate
2. Nut
3. Negative battery lead (black)
4. Positive battery lead (red)
5. Pull the battery out of its compartment.
8-57
[ECB01002]
4
3
8