Preparing Your Camcorder For Use; Battery Installation - Vivitar DVR-840XHD User Manual

Preparing Your Camcorder for Use

Battery Installation

Your DVR camcorder requires a Lithium-ion rechargeable battery (included in
packaging).
Open the battery compartment on the bottom of the camcorder.
1. Insert the batteries in accordance with the polarity (+ and - ) as indicated.
2. Close the battery cover.
Note: You must ONLY use the supplied AC charger to recharge the battery. The
camcorder should be Off while charging. Allow the battery to fully charge first. This
should take approximately 6 hours.
8