Vivitar DVR-210 User Manual page 43

System tones
This sets the operating sound.
[On]: Enable the system tone.
[Off]: Disable the system tone.
Note:
If the system tones is set to [On], the operating sound of some buttons will be enabled based on the following situations:
1. One press of the MODE button
S
2. One press of the button
3. The countdown of Self-timer
Speaker
This sets the playback volume. The volume becomes louder by toggling the zoom lever to the T /
softer to the W / direction. The adjustment range is from 0 to 5.
LCD brightness
This adjusts the brightness of the LCD monitor. The LCD becomes brighter by sliding the zoom lever to the T /
direction and darker to the W /
Power off
If no operation is performed for a specific period of time, the power to the DVR-210 is automatically turned off. This
feature is useful to reduce battery wear.
[3 Min]: When the DVR-210 has not been operated, it turns the power off after 3 minutes.
[5 Min]: When the DVR-210 has not been operated, it turns the power off after 5 minutes.
[10 Min]: When the DVR-210 has not been operated, it turns the power off after 10 minutes.
[30 Min]: When the DVR-210 has not been operated, it turns the power off after 30 minutes.
[Cancel]: The system turns into idle mode and LCD monitor turns off. You can press any button to resume operation.
direction. The adjustment range is from -5 to +5.
direction and
43