Sony STR-DH500 Operating Instructions Manual page 48

1
2
Press TUNER repeatedly to
select the FM or AM band.
Press PRESET + or PRESET -
repeatedly to select the preset
station you want.
Each time you press the button, you can
select a preset station as follows:
You can also press the numeric buttons to
select the preset station you want. Then,
press ENTER to enter the selection.
Using the controls on the
receiver
1 Turn INPUT SELECTOR to select the FM
or AM band.
2 Press TUNING MODE repeatedly to select
"PRESET T.".
3 Press TUNING + or TUNING - repeatedly
to select the preset station you want.
2
3
4
5
6
7
8
9
Press TUNER repeatedly to
select the FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
Tune in the preset station you
want to create an index name
for
(page 48).
Press AMP MENU.
"I-LEVEL" appears on the display.
Press 4,/+ repeatedly to select
"4-TUNER".
Press @ or ._ to enter the
menu.
Press el+ repeatedly to select
"NAME IN".
Press (_) or ._ to enter the
parameter.
The cursor flashes and you can select a
character.
Press 4,/+ to select a character,
then press _./,_ to move the
cursor to the next position.
If you made a mistake
Press _,/,1_until the character you want to
change flashes,
then press 41"/_" t o select
the correct character,
Tips
• Youcall select the character type as follows
by pressing 4,/_,.
Alphabet (upper case) ---+Numbers ---+
Symbols
• To enter a blank space, press * without
selecting a character.
Press @.
The name you entered is registered.
48us