Sony STR-DH500 Operating Instructions Manual page 20

The following illustration shows how to
connect a DVD player.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
Notes
• To input multi channel digital audio froru the DVD
player, set the digital audio output setting on the
DVD player. Refer to the operating instructions
supplied with the DVD player.
• As this receiver does not have analog audio input
jacks for DVD, conuect your DVD player to the
DIGITAL COAXIAL DVD IN jack on the
receiver. To output sound frorn the front left/right
speakers only, press 2CH.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
Audio signals
DVD player
Video signals
COMPONENT VIDEO
PB/CB PR/CR
VmDEO
O Coaxial digital cord (not supplied)
Q Component video cord (not supplied)
Video cord (not supplied)
20us