Step 6
Assign a port number for the camera to use. (Default is 80).
Important:
You must assign a port number that's not in use by any other application on
your network.
Step 7
Click Setup to apply the new settings.
Now the Camera with IP Address of 192.168.1.240 has port 80 Open.
Step 8
From one of the computers in
Network A's
router.
Step 9
Navigate to the router's Virtual Server or Port Forwarding page.
Step 10
Enable Forwarding of port 80 to the Camera's IP Address (192.168.1.240) and
save the new setting.
Step 11
From one of the computers in
Explorer), enter the Internet IP Address (WAN IP) of
(http://172.16.1.1) followed by a colon : and the number of the open HTTP Port (80) in
the Address Bar and press Enter.
Ex. http://172.16.1.1:80
The remote client in
Network
Network
Network B
should be able to see the images from the Camera now.
A, login to the web configuration utility of
B, open the web browser (Internet
Network A's
47
router