OPERATIONAL PRECAUTIONS
When shooting
• The data {Year-Month-Day or Day-Hour-Minute} is
recorded on film as in the picture on the right. The data
on the LCD panel is imprinted on each frame you
expose.
• If the corner of the picture where the data is imprinted
has a white or yellow object, the data will be difficult to
see. When composing, try to avoid a brightly-colored
subject in that corner.
• "Year-Monlh-Day" and ''Day-Hour-Minute " cannot both
be imprinted at the same time.
• As you release the shutter, the bar mark ( —) on the
LCD panel flickers for a few seconds, indicating the data
has been imprinted.
Power source of the data-imprfnting section
The data imprinting section is powered by the batteries in
the camera's main unit. When the batteries are replaced,
the date and time may change. So, after replacing
the batteries, make sure to confirm the date and time
before use.