Delay Start - Panasonic NE-7910 Service Manual

Step 3. Set Warm Power by tapping Power pad 6 times.
— Auto Program indication (A2, for example) disappears. Auto Indicator Light goes off and Warm power indicator
light turns on.
Step 4. Set Warming time by tapping Time pads.
— Warming time selected appears in the display window.
Step 5. Touch Start pad.
— Warm power Indicator Light goes off and Auto Indicator Light turns on and blinks. Warming time disappears
and Auto Program (A2, for example) reappears. Oven lamp turns on. Turntable rotates. Microwave activity
begins.
— When Auto Sensor Cooking is over, Auto Indicator Light turns off, Warm power Indicator Light comes on and
blinks. Warming time appears in the display window and begins to count down.
— When warming time has elapsed the oven beeps and shuts off automatically. Microwave activity stops. Turntable
stops. Oven lamp turns off and TOD reappears in the display window.
TIME/DELAY START
TIMER This models' digital display window can be used as a timer in the following manner:
Step 1. Set the desired time by tapping Time pads.
— TOD AND colon disappear and the selected time appears in the Display Window.
Step 2, Touch START pad.
— The time displayed simply counts down, as a digital timer would. No microwave activity begins.
Turntable does not rotate. No lights appear.
— When time has elapsed, oven beeps. TOD reappears in the Display Window.
DELAY START This oven can delay the start of any cooking function by up to 99 minutes and 99 seconds.
Step 1. Set the length of time you would like to delay the start of cooking, defrosting, or auto sensor cooking.
— TOD and colon disappear and the delay time selected appears in the Dispay Window.
Step 2, Set Power and time for Cook, or Defrost, or Select Auto Sensor Control for Auto Cooking cycle.
NOTE jIt is not possible to use the delay feature for 2 phase cooking. For example Delay-Auto Cook-Warm cycle. In other
words the three stage program cannot be accepted. ''E"' indicating error will appear in the display window, if these
selections are chosen.
Step 3. Touch START pad.
— 2nd phase cooking selection disappears and the delay time reappears in the Display Window and starts to count
down. No microwave activity begins. Turntable does not rotate. No lights appear.
-— When delay time has elapsed, oven automatically enters seccnd programmed cycle.
— When cooking cycle is over, oven {amp and the power indicator light turn off. Turntable stops. TOD reappears in
the Display Window.
CHECKING PROCEDURE ON OPERATION
Instructions relating to Auto Sensor Cooking are only for NE-7910, NE-7910C.
1. If "E" indication appears in the Display Window:
You might have given wrong instruction. Touch "RESET" pad to clear and give new instructions from the beginning.
"E'' indicating ERROR, appears under following conditions.
e When Auto Sensor Cooking is selected after Power/Time cooking is selected.
« When Auto Sensor Cooking is selected after Defrost/Time is selected.
—~9—