BMW S 1000 RR Rider's Manual page 98

92 TFT DISPLAY
for smooth operation in every
situation.
Possible sources of
interference:
Interference fields due to
transmission towers and simi-
lar.
Devices with incorrectly im-
plemented Bluetooth radio
standard.
By nearby Bluetooth-capable
devices.
Shielding by metals or bodies.
Pairing
Two Bluetooth devices have
to recognize each other be-
fore they can communicate.
This process of mutual recogni-
tion is known as pairing. When
two devices have paired they
remember each other, so the
pairing process is conducted
only once, on initial contact.
On some mobile termi-
nals, e.g. with operating
system iOS, you must go to the
BMW Motorrad Connected App
before use.
During the pairing process, the
instrument cluster searches for
other Bluetooth-compatible de-
vices within its reception range.
The conditions that have to be
satisfied before a device can be
detected are as follows:
The Bluetooth® function of
the device must be activated
The device must be "visible"
to others
Other Bluetooth-capable de-
vices must be OFF (e.g. mo-
bile phones and navigation
systems).
Please consult the operating
instructions for your communi-
cation system.
Carrying out pairing
Call up menu
Connections
Bluetooth connections can
be established, managed, and
deleted in the
menu. The following Blue-
tooth connections are dis-
played:
Mobile device
Rider's helmet
Passenger helm.
The connection status for mo-
bile end devices is displayed.
Connecting a mobile end
device
Carry out pairing. (
Activate the Bluetooth func-
tion of the mobile end device
(see operating instructions for
the mobile end device).
,
Settings
.
CONNECTIONS
92)