BMW S 1000 RR Rider's Manual page 122

116 SETTING
For increasing the damping:
Turn the adjustment screw
with tool from onboard tool
kit so that the mark 2 points
to a higher scale value.
For reducing the damping:
Turn the adjustment screw
with tool from onboard tool
kit so that the mark 2 points
to a lower scale value.
Compression stage, ba-
sic setting, front
Position 5 (Road mode with
rider 187 lbs (85 kg))
Adjusting the rebound-stage
damping on the front wheel
without Dynamic Damping
Control (DDC) OE
Adjust rebound-stage damp-
ing using adjustment screw 1
and red scale on right-hand
fork leg.
For increasing the damping:
Turn the adjustment screw
with tool from onboard tool
kit so that the mark 2 points
to a higher scale value.
For reducing the damping:
Turn the adjustment screw
with tool from onboard tool
kit so that the mark 2 points
to a lower scale value.