Replacing The Wristband; Cleaning The Unit And Wristband - Garmin foretrex 301 Owner's Manual

Replacing the Wristband

1. Use a #1 Phillips screwdriver to
remove the screws (2) on the
back of the unit.
Screw
Screw
2. Remove the old wristband.
3. Align the loops of the new
wristband with the screw holes on
the back of the unit. Make sure
that the Garmin logo is facing up.
4. Replace the screws.
Foretrex 301/401 Owner's Manual
Screw hole
Screw hole
To install the extension strap
(optional):
1. Thread the end of the Foretrex
strap through the plastic ring on
the extension strap.
2. Thread the other end of the
extension strap through the
plastic ring on the Foretrex strap.
3. Adjust as necessary.
Cleaning the Unit and
Wristband
The Foretrex is constructed of
high-quality materials and does not
require user maintenance other than
cleaning. Clean the unit using a cloth
dampened with a mild detergent
solution and then wipe dry. Avoid
chemical cleaners and solvents that
may damage plastic components.
The wristband should be hand
washed with mild detergent in warm
or hot water. Blot dry, then air dry.
Do not machine wash.
Appendix
27