Siemens SINUMERIK 840D sl TCU 30.3 Equipment Manual page 20

Description
3.1 Overview
Compatibility
The TCU 30.3 is compatible with the following systems (also as spare part for the TCU, TCU 20.2
and TCU 30.2):
• SINUMERIK 840D sl:
– NCU 7X0.3(B) PN (>= CNC SW 2.7 SP3 HF10)
• Or SIMATIC IPC 427E for SINUMERIK, with PCU basic software
• Or SINUMERIK PCU 50.5 (Windows XP / Windows 7)
• Operator panel fronts:
– OP 010, OP 010C, OP 010S, OP 012, OP015, OP 015A, TP 015A, OP 019
Design
The TCUs are coupled via Ethernet as Thin Clients to the PCU/NCU/IPC in a dedicated subnetwork
(via DHCP server on the PCU/NCU/IPC).
Interfaces:
• 4 x USB 2.0 Hi-Speed to connect the mouse, keyboard and USB flash drive
• Ethernet 10/100/1000 Mbit/s
The transmission rate in Ethernet system networks automatically sets itself to the maximum
possible value. 1000 Mbps can only be achieved with NCU 7x0.3B PN, IPC and PCU 50.5 (if
a PCU is required).
Note
The Ethernet interface has so-called Auto MDI-X functionality. If required, the send and
receive lines of the Ethernet cable are crossed in the PHY. If, however, the partner does not
have "Autocrossover", a crossover cable is required.
Information about third-party software used
This product contains open source software. License information can be obtained via the
shortcut "License files" on your SINUMERIK PCU desktop, or navigate to the SINUMERIK Operate
Readme OSS path "Setup/system data: System CF card/siemens/oss-license" on your SINUMERIK
NCU and read the appropriate OSS file for this device.
20
Equipment Manual, 03/2023, A5E40874197B AD
TCU 30.3