Visioneer 9650 Installation Manual page 43

4. From the Scanner drop-down list, select Visioneer 9650 V1.10.
5. In the "Scan what?" section, choose to scan a Document or
Photograph.
6. Click Settings to view and change the format for the scanned item's
file name and the file type. The default file type for documents is
.pdf and for photographs is .jpg.
7. Use the Single page items check box as follows:
When the check box is selected, pages are scanned and placed on
I
the PaperPort desktop.
When the check box is not selected, pages are scanned but not
I
placed on the PaperPort desktop until you indicate the scanning
job is finished.
8. Click the Scan button on the Scan pane.
The Scan using Visioneer 9650 window opens. Use this window to
select scanning options and start the scanner.
9. From the Paper Source drop-down list, select Flatbed or Document
Feeder (if you are going to use the ADF).
If you selected Document Feeder, select a paper size from the Page
size drop-down list.
S W
CANNING FROM INDOWS
ME XP 39
OR