Table of Contents
Advertisement
needed, using ammonia cream cleanser
agent without scratching the seal surface.
Always obey the instructions that you find
on the packaging of the product.
13.7 Cleaning the drum
Regularly examine the drum to prevent rust
particles.
For a complete cleaning:
13.8 Cleaning the detergent dispenser
1
13.9 Cleaning the drain filter
Regularly check the drain pump filter and
make sure that it is clean.
Clean the drain pump if:
• The appliance does not drain the water.
• The drum does not turn.
• The appliance makes an unusual noise
because of the blockage of the drain
pump.
• The display shows the alarm code
WARNING!
• Disconnect the mains plug from the
mains socket.
• Do not clean the pump if the water in
the appliance is hot. Wait until the
water cools down .
• Do not remove the filter while the
appliance operates.
• Unscrew the filter slowly and gently
until the water stops flowing out. After
water has been drained, filter can be
unscrewed fully.
1. Clean the drum with special products for
2. Run a short cotton programme at high
2
Always keep a rag nearby to dry up any
water spillages when removing the filter.
stainless steel.
Always follow the instructions that you
find on the packaging of the product.
temperature or use if is available
programme Čištění pračky. Add a small
quantity of powder detergent into empty
drum, in order to rinse out any left
residues.
3
ENGLISH
29
Advertisement
Table of Contents
