AEG LTR8E363C User Manual page 20

The acoustic signals, they continue
operate when the appliance has a
malfunction.
9.2 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option, touch
the Odstřeďování and the Skvrny/
Předpírka buttons simultaneously until the
indicator comes on/goes off on the
display.
You can activate this option:
• After you touch the Start/Pauza button: all
the buttons and the programme dial are
deactivated (except Zap./Vyp. button ).
• Before you touch the Start/Pauza button:
the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
9.3 Soft Plus
Set the Soft Plus option to optimise the fabric
softener distribution and improve the fabric
softness.
It is suggested when you use the fabric
softener.
This option increases slightly the
programme duration.
To activate/deactivate this option touch the
Teplota button and the Odstřeďování button
simultaneously until the
on/goes off above the
9.4 Permanent Extra Rinse
With this option you can permanently have an
extra rinse when you set a new programme.
• To activate/deactivate this option touch
the Skvrny/Předpírka button and the
Máchání button simultaneously until the
indicator of the Extra máchání button
comes on/goes off.
20 ENGLISH
indicator comes
indicator.
9.5 Operating Hours Counter
It is possible to visualise the total operating
time of the appliance in hours, starting from
the first switching on. This value will count
operating time of the cycles (does not include
pauses, delayed start time). To visualise this
value, proceed as follows:
1. Switch the appliance on by pressing Zap./
Vyp. button.
2. Turn the programme knob to the Eco
40-60 programme (1st position
clockwise).
3. Press and hold the Antialergický and
Skvrny/Předpírka buttons for some
seconds (within 10 seconds after the
switching on. After these 10 seconds, the
key combination activates and
deactivates the acoustic signals).
4. After 3 seconds the total hours operated
by the appliance are shown in the display:
e.g. 1276 hours, the display shows the
text Hr for 2 seconds, 12 (thousands and
hundreds) for 2 seconds and 76 (tens and
units).
If the procedure does not work (due to
timeout, wrong programme dial position
or wrong keys combination), switch the
appliance off and repeat sequence from
the beginning.
9.6 Factory Reset
This function allows to restore the factory
default options. To activate this option follow
steps below:
1. Switch the appliance on by pressing Zap./
Vyp. button.
2. Turn the programme knob to the
Syntetika programme (3rd position
clockwise).
3. Press and hold the Antialergický and
Skvrny/Předpírka buttons for some
seconds (within 10 seconds after the
switching on. After these 10 seconds, the
key combination activates and
deactivates the acoustic signals).
4. The display will show
seconds.
for about 5