Contents Caution Safety Information Instructions for fixing stand Unit and Accessories Product Feature Introduction 1. Front View 2. Rear View 3. Remote Control Basic Operation OSD Menu 1. Picture menu 2. Audio menu 3. Time menu 4. Setup menu 5. Lock menu 6.
Caution Caution is intended to alert the user to the presence of un-insulated "dangerous to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Physical safety • Do NOT block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure at least 5cm (2") clearance all around the unit. • Do NOT tap or shake the TV screen, you may damage the internal circuitry. Take good care of the remote control, do not drop it or allow it to come into contact with liquids.
Instructions for fixing stand Instructions for fixing stand Note: the pictures below are only for reference 1. Insert stand(part A) into unit(part B). 5 x M4 x 15 2. Screw the stand in the position as the picture shows. Screws (5 x 2836/M4 x 20) are provided with stand.
Security Plate Screws for stand (5 x M4 x 15) Product Feature • Integrated ATSC TV tuner for HDTV broadcast reception • Dual HDMI input for true digital connections • VGA port for connection to PC • Cloning Support • Swivel Stand •...
Standby mode Power on mode above or below the remote control Press INPUT button on the TV set or remote control to display the input source menu, and use CH+/- button on the TV set or button on remote control to select the input source, press OK button on the remote control to enter.
VIDEO out: Connect it to other TV’S video intput . VIDEO L/R out: Connect them to other TV’S audio input. S-VIDEO: S-Video signal input. COAX: Digital coaxial output. RF: Connect antenna or cable 75 Ohm coaxial to receive TV signal. Service: USB port for service. Introduction R OUT...
3. Remote Control The remote control is using Infra-Red(IR). Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle. INPUT -/-- PICTURE SOUND...
Don’t mix different types or used batteries with new ones. 3. Close the cover. - The remote control should be operated within 30 feet(7m) and 30 IR receive at the front of the LCD TV. - Used batteries should be disposed properly. Introduction...
Press POWER button on the TV or remote control. Input Source select Press INPUT button on the TV set or remote control to display the input source menu, and use CH+/- button on the TV set or remote control to select the input source, press OK button on the remote control to enter.
Basic OSD Menu operation Press MENU button to display the OSD menu as below: button to select the main menu, and press In the submenu, use adjust ("Contrast" item in Picture menu for example) with select ("Picture Mode" item in Picture menu for example) with enter the submenu ("Close Caption"...
OSD Menu OSD Menu 1. Picture menu Description Picture mode: Select between Standard, Dynamic, Mild, Sports and User. You may select the picture mode directly by pressing the PICTURE button on the remote control. Contrast: Control the difference between the bright and dark regions of the screen picture. Brightness: Adjust brightness of the picture.
OSD Menu 2. Audio menu Flat Description Sound Mode: Select your desired picture mode as follow: Flat, Music, Movie, Sports and User You may select the sound mode directly by pressing the SOUND button on the remote control. Bass: Low frequencies intensity. Treble: High frequencies intensity.
OSD Menu 3. Time menu Description Sleep timer: You may set the automatic shutdown timer choosing from 5 to 240 minutes, or deactivate this function. Time zone: Daylight Saving Time: Select between On and Off. Clock: User can not change time manually during DTV mode, for time is from signal source directly.
4. Setup menu PC SETUP Closed Caption Description Menu Language: Select OSD menu language. Transparency: Turn on or off the transparency menu function. Zoom Mode: Select the zoom mode between 16:9, 16:9 zoom, 4:3, 4:3 zoom. Noise reduction: Select the noise reduction mode between Strong, Off, Weak and Middle.
6. Channel menu Setup Picture Audio Time Cable Air/Cable Auto Scan Favorite Show Hide Channel No. Channel Label DTV Signal Move Description Air/Cable: Allow you to select antenna between Air and Cable. If you selet “Cable”, the following items(Favorite, Show/Hide, Channel NO, Channel Label and DTV Signal) are unable to use.
Specialty Hotel and Commercial Features Specialty Hotel and Commercial Features Securing the TV This TV can be secured to the surface of a desk or table using the included security plate and lock. To secure the TV: Affix the security plate firmly to the surface of a desk or table in the position where you would like the TV to be located using 3xST4x20C type screws.
Page 21
This TV includes a metal security cover to restrict access to the TV’s connectors. Use of this cover is optional. The cover ships installed on the TV and must be removed prior to cable connection. Care should be taken to use cables that can be accommodated under the cover when it is screwed in place.
Page 22
Specialty Hotel and Commercial Features Bend cables downwards and tie together Fix cover in place with provided 4 x security screws and screwdriver. Take care not to capture cables between TV and cover. 2xM3x10 2xST4x12C Screw driver T20 Screw driver T15...
Page 23
Specialty Hotel and Commercial Features Configuring Hotel Mode settings This TV includes a specialized Hotel Mode Menu that allows you to configure settings for hotel and commercial use. You may restrict users’ access to TV features and control channel and volume settings.
Page 24
Connect an antenna and run a channel scan as detailed on page 17. Set On Channel to ON. Set On Channel Number to the desired starti-up channel from the list of tuned channels. Every time the TV is ON it will start up on the selected channel regardless of the last-used channel.
Specialty Hotel and Commercial Features Cloning Support Master TV settings can be easily transferred to multiple guest room TVs using the optional Cloning Tool CL100. Please refer to CL100 user manual for details. Master TV Upload setting Cloning Tool Model: CL100 (Optional)
- Check the aerial connections. - Check that the channel is tuned in properly. - Adjust the picture settings:brightness,colour,sharpness,contrast,hue. - Make sure that the TV is not located close to electrical appliances that may emit radio frequency interference. No colour - Adjust the colour setting.
Page 27
S-VIDEO VIDEO AUDIO(L/R) * Product specifications and appearance are subject to change without notice. 450cd/m 4000:1 8W x 2 1366 x 768 150W...
Page 28
VIORE will repair or if repairs cannot be made, VIORE will replace this Product at no charge if the Product is defective as specified in this limited warranty during the limited warranty period. VIORE may use new or remanufactured parts or products to repair or replace the Product at its sole discretion.