Panasonic SC-HT80 Operating Instructions Manual page 23

m
1
I=]
2
• -SELECT
%
., . , . ,I _
m
Some DVDs allow you to view the same scene from different '
angles.
1
Press [ANGLE] during play.
2
Press [UP/ON A] or [DOWN/OFF _]
to change the angle.
To clear the display
Press[ANGLE]or [SELECT],
• "ANGLE" lights up on the unit's display during scenes with
multiple angles recorded to indicate this feature is available.
• Some discs allow you to set angles before multi-angle scenes
are played. Read the instructions that come with the DVD.
1
Press [DISC].
2
Press [1]-[5] to select a disc.
Wait for the disc to change and play to start,
Press the numbered buttons to select
the track.
For tracks numbered 10 or over, press [k10/ENTER] then the
two digits,
Track no. 10: p__10/ENTER]_- [1]_ [0]
Track no. 25: [_>10/ENTER] _ [2]_ [5]
• When playing video CDs with PBC, stop the disc then press
[STOP • ] again to cancel playback control, then select the track
number. To restore playback control, stop the disc and press
[MENU].
• There are some video CDs with PBC where this will not work.
I.
{: