Installation Of Memory Modules (So-Dimm) - ASROCK STX-1001 User Manual

2.3 Installation of Memory Modules (SO-DIMM)

STX-1001 provides one 260-pin DDR4 (Double Data Rate 4) SO-DIMM slot, and supports
Single Channel Memory Technology.
The DIMM only fits in one correct orientation. It will cause permanent damage to the moth-
erboard and the DIMM if you force the DIMM into the slot in the incorrect orientation.
Installing a SO-DIMM
Step 1. Align a SO-DIMM on the slot such that the notch on the SO-DIMM
matches the break on the slot.
Step 2. Firmly insert the SO-DIMM into the slot until the retaining clips at both
ends fully snap back in place and the SO-DIMM is properly seated.
STX-1001
11