Table of Contents
Advertisement
2.3 Installation of Memory Modules (SO-DIMM)
SBC-372 provides one 262-pin DDR5 (Double Data Rate 5) SO-DIMM slot, and supports
Dual Channel Memory Technology.
Step 1.
Align a SO-DIMM on the slot such that the notch on the SO-DIMM matches the
break on the slot.
1.
2.
Step 2.
Firmly insert the SO-DIMM into the slot until the retaining clips at both ends fully
snap back in place and the SO-DIMM is properly seated.
10
The SO-DIMM only fits in one correct orientation. It will cause permanent damage to
the motherboard and the SO-DIMM if you force the SO-DIMM into the slot at incor-
rect orientation.
Please do not intermix different voltage SO-DIMMs on this motherboard.
Advertisement
Table of Contents
