Aiwa NSX-D77 Operating Instructions Manual page 12

Up to 30 tracks can be programmed from any of the inserted
disc.
Use the remote control.
7 Press PRGM twice in stop mode.
PRGM indicator lights up on the display.
Bi
Ae p o e a or ee i re
¢ When PRGM is pressed once in step 1, the unit enters
KARAOKE PROGRAM (page 20).
2 Press DISC DIRECT PLAY, then press one of the
numbered buttons 1-5 within 3 seconds to select
a disc.
Go to the next step when the tray stops rotating.
3 Press the numbered buttons 0-9 and +10 to
program a track.
Example:
To select the 25th track, press +10, +10 and 5.
To select the 10th track, press +10 and 0.
Selected
track number
Total number of
selected tracks
Program number Total playing time of
the selected tracks
4 Repeat steps 2 and 3 to program other tracks.
5 Press >/<> to start play.
To check the program
Each time <4 or ® is pressed in stop mode, a disc number,
track number, and program number will be displayed.
To clear the program
Press Il CLEAR in stop mode.
To add tracks to the program
Repeat steps 2 and 3 in stop mode. The track will be ercoamnmned
after the last track.
11 ENGLISH
To change the programmed tracks
Clear the program and repeat all the steps again.
To play the programmed iracks repeatedly
After programming the tracks, press RANDOM/REPEAT
repeatedly until @ appears on the display.
¢ During programmed play, you cannot perform random play,
check the remaining time, and select a disc or track. "Can't
USE?' is displayed if you attempt to select a track.
¢"FULL' is displayed if you attempt to program more than 30
tracks.