Aiwa NSX-D77 Operating Instructions Manual page 10

CD EDIT/
MULTI WG CaEcK
as
RANDOM/
REPEAT
r
" 0-9, +10
<<>> te il
CD EDIT/
CHECK
DISC
DIRECT
DISC
CHANGE PLAY ©
DISC
DIRECT
PLAY
& OPEN/
CLOSE
eI EU a ee ie me See ureter od
LOADING DISCS
Press CD, then press 4 OPEN/CLOSE to open the
disc compartment. Load disc (s) with the label side
up.
To load one or two discs, place the disc(s) on the tray(s) in the
direction of the arrows as illustrated.
DISC CHANGE
Tray ———Cy)
number | iM <
To load three to five discs, press DISC CHANGE to rotate the
trays after placing two discs. Place the next disc on the empty
tray. Each time DISC CHANGE is pressed, the trays rotate and
one disc can be placed.
After placing the disc, press 4 OPEN/CLOSE to close the
disc compartment.
The display shows the information of the disc to be played.
Tray number of the
disc to be played Total playing time
Total number of tracks
9 ENGLISH
PLAYING DISCS
Load discs.
To play all discs in the disc compartment, press
<>.
Ali discs are played once.
Number of track being played Elapsed playing time
ed
fe
if
To play one disc only, press one of the DISC DIRECT
PLAY 1-5.
The selected disc is played once.
To play with the remote control
Press DISC DIRECT PLAY, then press one of the numbered
buttons 1-5 within 3 seconds to select a disc.
To stop play, press Mf.
To pause play, press Il. To resume play, press again.
To search for a particular point during playback, keep <<
or ® pressed and release it at the desired point.
To skip to the beginning of a track during playback, press
<< or BP repeatedly or turn MULTI JOG.
To remove discs, press 4 OPEN/CLOSE.
You can only remove the two discs that face you. When the disc
to be removed does not face you, press DISC CHANGE
repeatedly.
To start play when the power is off (Direct Play Function)
Press CD. The power is turned on and play of the loaded disc(s)
begins. ,
When & OPEN/CLOSE is pressed, the power is also turned on
and the disc compartment is opened.
To check the remaining time
During play (except random play or programmed play), press
CD EDIT/CHECK. The amount of time remaining until all tracks
finish playing is displayed. To restore the playing time display,
press CD EDIT/CHECK again.
Selecting a track with the remote control
1 Press DISC DIRECT PLAY, then press one of the numbered
buttons 1-5 within 3 seconds to select a disc.
2 Press numbered buttons 0-9 and +10 to select a track.
Example:
To select the 25th track, press +10, +10 and 5.
To select the 10th track, press +10 and 0.
The selected track starts to play and play continues to the
end of that disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced without
interrupting play.
1 Press DISC CHANGE.
Two discs can be replaced.
2 Remove the discs and replace with other discs.
To replace the other two discs, press DISC CHANGE again.
3 Press & OPEN/CLOSE to close the disc compartment.