Table of Contents
Advertisement
Heat setting displays
Display
-
/
-
+ digit
/
/
OptiHeat Control (3 step Residual heat
indicator)
WARNING!
/
/
There is a risk of burns
from residual heat. The indicator
shows the level of the residual heat.
The induction cooking zones make the heat
necessary for cooking process directly in the
bottom of the cookware. The glass ceramic is
heated by the heat of the cookware.
The heat setting
To set or change the heat setting turn the knob
to the correct heat setting. To deactivate turn
the knob to off position
Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you
activate the hob,
• you spill something or put something on the
control panel for more than 10 seconds (a
pan, a cloth, etc.). An acoustic signal sounds
www.zanussi.com
The cooking zone is deactivated.
The cooking zone operates.
The dot means a change by half of a heating level.
STOP+GO function operates.
Automatic Heat Up function operates.
Power function operates.
There is a malfunction.
OptiHeat Control (3 step Residual heat indicator): continue cooking / keep
warm / residual heat.
Lock / The Child Safety Device function operates.
Incorrect or too small cookware or no cookware on the cooking zone.
Automatic Switch Off function operates.
.
Description
and the hob deactivates. Remove the object
or clean the control panel.
• the hob gets too hot (e.g. when a saucepan
boils dry). Let the cooking zone cool down
before you use the hob again.
• you use incorrect cookware. The symbol
comes on and the cooking zone deactivates
automatically after 2 minutes.
• you do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the hob deactivates.
The relation between the heat setting and
the time after which the hob deactivates:
Heat setting
, 1 - 2
3 - 4
5
6 - 9
The hob deacti-
vates after
6 hours
5 hours
4 hours
1.5 hour
9
Advertisement
Table of Contents
