Table of Contents
Advertisement
Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time. The
function sets the highest heat setting for some
time and then decreases to the correct heat
setting.
To activate the function the cooking
zone must be cold.
To activate the function for a cooking
zone: turn the knob for a cooking zone to
position A.
comes on in the display.
Immediately set the correct heat setting.
To deactivate the function: turn the knob to
the off position.
Power function
This function makes more power available to the
induction cooking zones. The function can be
activated for the induction cooking zone only for
a limited period of time. After this time the
induction cooking zone automatically sets back
to the highest heat setting.
To activate the function for a cooking
zone: touch
.
To deactivate the function: change the heat
setting.
Timer
Count Down Timer
You can use this function to set how long the
cooking zone should operate for a single
cooking session.
First set the heat setting for the cooking zone
then set the function.
To set the cooking zone: touch
again until the indicator of a necessary cooking
zone comes on.
To activate the function: touch
timer to set the time (00 - 99 minutes). When
the indicator of the cooking zone starts to flash
slowly the time counts down.
To see the remaining time: set the cooking
zone with
. The indicator of the cooking zone
starts to flash quickly. The display shows the
remaining time.
10
comes on.
again and
of the
To change the time: set the cooking zone
with
. Touch
or
To deactivate the function: set the cooking
zone with
and touch
counts back to 00. The indicator of the cooking
zone goes out. To deactivate the function you
can also touch
and
When the time comes to an end, the
sound operates and 00 flashes. The
cooking zone deactivates.
To stop the sound: touch
CountUp Timer (The count up timer)
You can use this function to monitor how long
the cooking zone operates.
To set the cooking zone: touch
again until the indicator of a necessary cooking
zone comes on.
To activate the function: touch
timer.
comes on. When the indicator of the
cooking zone starts to flash slowly the time
counts up. The display switches between
and counted time (minutes).
To see how long the cooking zone
operates: set the cooking zone with
indicator of the cooking zone starts to flash
quickly. The display shows how long the zone
operates.
To deactivate the function: set the cooking
zone with
and touch
of the cooking zone goes out.
Minute Minder
You can use this function as a Minute Minder
when the hob is activated and the cooking
zones do not operate. The heat setting display
shows
.
To activate the function: touch
or
of the timer to set the time. Cooking
zones display deactivates automatically after 10
seconds. When the time comes to an end, the
sound operates and 00 flashes.
To stop the sound: touch
To deactivate the function: activate for a
short time and deactivate left front cooking
zone.
.
. The remaining time
at the same time.
.
again and
of the
. The
or
. The indicator
. Touch
.
www.zanussi.com
Advertisement
Table of Contents
