Timer-On Operation - Crosley CR79 Instruction Manual

Clock Operation

Timer-On Operation

Example: "Set Timer-On for 7:05 am."
A
Press "MODE" to timer-on display mode.
B
Press "CLK-ADJ" to enter to timer-on hour
adjustment mode.
C
Press "FF / FB" to set desired hour. (e.g.12:00am
7:00am )
D
Press "CLK-ADJ" to enter to timer-on minute -
adjustment mode.
E
Press "FF / FB" to set desired minute. (e.g.
7:00am 7:05am )
F
Press "CLK-ADJ" to enter to recording source
mode.
G
For Non-Timer-Recording, select 'No-Src'. If
Timer-Recording require select a particular
source (CD/TUNER/PHONO).
H
Press "CLK-ADJ" to return to timer-on display
mode with activation of Timer-on function.
press"MODE" to Timer-on
setting
press"CLK-ADJ"
enter to
HOUR-ADJ mode
enter to press"FF/FB" to
enter to source
MINUTE-ADJ target me and then
mode "CLK-ADJ" selection
press"FF/FB"
to select
source
(CD/TUNER/
PHONO)
press "CLK-ADJ"
end of Timer-on
for syno-
adj
Rec only
9
A
Press "TIMER" to deactivate (both icons
flash) or activate (only 'Timer' flash ) Timer-
on function.
Timer-on function activated
deactivate press"TIMER"
Timer-on function
CD Player & Connecting Optional Equipment
CD stopped
enter to press"PROG"
PROGRAM mode
press"PROG"
enter to
press"PROG"
PROGRAM mode
press"PROG"
enter to
press"FF OR FB"
RE-PROGRAM
mode
press"PROG"
Random
A
In the stop or play mode, Press "RANDOM" to
activate or deactivate the random function.
Notes:
1) It can work with "INTRO", "REPEAT" and
"REMAIN".
2) The random function will not clear except press
"STOP" twice or press "PROG" in STOP mode.
play without
Random
press "RANDOM"
play with Random
press "RANDOM"
Repeat
To repeat playback of a single track or the whole
disk, press the "REPEAT" button. Pressing this
button once will repeat only the selected track and
a flashing "REPEAT" will appear on the display.
Pressing the "REPEAT" button twice will repeat the
whole CD when it reaches the end and repeat will
appear but will not flash. Pressing "REPEAT" a third
time will turn off the repeat function.
One track repeat (flashing) All track repeat
Optional External Speakers
1
With your new radio, you have the option of
adding external speakers.
2
The speaker jacks for external speakers are
located on the back of the radio. Along with the
speaker jacks is a switch labeled int./ ext. When
using external speakers, this switch must be
switched to the ext. position. Doing this turns off
the internal speakers in the radio and redirects
the power to the external speakers.
3
If you decide not to use the external speakers,
be sure the switch is on int. or the internal
speakers will not work.
14