Table of Contents
Advertisement
• Balanced winder operation.
• Easy-to-use depth -of-field preview button
.
Quick attach auto winder
The XG's accessory auto winder attaches
qu ickly, without access caps to remove or store
freeing the user from advancing film in single:
frame or continuous operation up to two
frames per second. Its strong efficient core less
micromotor winds as many as 150 or more
cartridges per set or charge of batteries. At the
end of each cartridge the motor automatically
shuts off.
Special camera-control flash units
When' attached to the XG -9 and ready to
fire, both the Auto Electroflash 200X and
132X start a flash-ready signal blinking in the
viewfinder and automatically set the shutter for
X -synchronization
(1/60
sec.) when the shutter
is released. The Auto Electroflash 132X
fea-
tures two auto settings as well as manual and a
tiltable flash head for bounce flash. Its special
flash distance check lamp lights to indicate
when flash brightness is sufficient for correct
exposure. The 200X model provides auto flash
at either of two apertures and either full -power
manual operation or when powered by Ni-Cd
batteries,
up to two cont inuous-sequence flash
exposures each second with the Auto Winder G
.
User oriented features
•
Up to two stops' continuous adjustment
over or under the normal electron ic
setting.
•
X -type flash synchronization through the
hot shoe or PC terminal.
•
Electronic self-timer with blinking indicator
l
ight.
•
Eyepiece cap for unmanned or similar oper-
ation.
•
Exclusive Safe Load Signal monitors film
alignment and advance.
•
Handy memo holder and ASA/DIN
conver-
sion scale on
back.
•
Release terminal for tripod shots with elec-
tronic or standard release cord
.
• Shutter
not
operative
when
operation
switch
off.
•
Virtually all existing Minolta interchange-
able lenses and applicable system accessor ies
can be used in either automatic or manual
operation
.
5
Advertisement
Table of Contents
