Table of Contents
Advertisement
40
SELF-TIMER
The electronic self-timer built into your
XG-9 can be used to delay release of the shutter
for about 10 seconds after actuation.
To operate
it:
1,
Advance the film.
2.
With the shutter-speed/function selector at a
setting other than "8," move the main
switch to align the index with SELF-
TIMER
.
3
.
Depress the operating button. The blinking
light on the front of the camera will indicate
the delay has been started. Approximately
2.5
secs.
before the exposure is made, the
indicator
will blink faster to signal the end
of the
delay.
You may cancel the self-timer
by moving the main switch to
"
OFF"
.
NOTE
• After using the
.
self-timer be sure to move
the main switch from the "SELF-TIMER"
setting.
• In
automatic mode, the self-timer will
cancel if exposure conditions exceed the
upper range of the matering system.
Opera-
tion will resume when apertu re or othe
r
conditions are adjusted so that exposure
conditions are within metering range
.
Advertisement
Table of Contents
